Oil Absorbent Filter Cartridges
Our range of oil absorbent filter cartridges have been developed for applications requiring removal of hydrocarbons from water as a polishing filter after coalescing or following other bulk removal methods. It is recommended for applications with <500ppm total hydrocarbons, and has a retention of 99%.
Oil absorbent cartridges are constructed from an impregnated media consisting of fibres that have a unique coating thermally bonded within the structure.
Using the standard media, flow is not effected and no hydrocarbons are released. The filter media will absorb 3 times its weight before change out is required. As an option, our ‘Plus’ media will build up a differential pressure and flow will be reduced as the cartridge absorbs hydrocarbons.
Alternatively, our ‘Block’ media forms an instant barrier when in contact with hydrocarbons, and can be used for final stage oil removal where no oil in water monitors are present.
- Available 9 ¾” to 60” length.
- Standard O.D. 70mm. (Optional large 116mm diameter). I.D. 27.5mm.
- Standard construction is with a polypropylene core.
- Available with industry standard end caps.
- O-rings for end caps include Nitrile, EPDM, Silicone, Viton, PTFE encapsulated Viton, PTFE encapsulated Silicone.
- Stainless steel core and caps available for more demanding applications.
- Maximum operating temperature 80o
- Food grade version available.
Please contact us for further information or view our range of Filter Cartridges.
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.