Resin Bonded Filter Cartridges
Resin bonded filter cartridges are low cost, nominal rated depth filters.
Most common applications include :
- Filtration of fluids with a high viscosity.
- Filtration of solvents, including solvent based paints.
- Processes requiring a high operating temperature.
- Processes permitting a high differential pressure across the filter.
Resin bonded cartridges are manufactured from long acrylic fibres which provide superior cartridge strength and resist breakage. Phenolic resin impregnation also enhances the strength of the cartridge structure and eliminates the need for a support core.
Resin Bonded filter cartridges feature a unique two-stage filtration design to maximise particle retention and service life. The outer, spiral wrap collects large particles and agglomerates, whilst the inner layers control the removal of smaller particles.
- Available in a wide range of micron sizes from 2 – 150.
- Standard length: 9 7/8” to 40”.
- Standard diameter : I.D. 28.6mm, O.D. 65mm.
- Double open ended configuration.
- Maximum recommended operating temperature 121o
- Recommended change out differential pressure 3.5Bar.
Please contact us for further information or view our range of Filter Cartridges.
Related Products
-
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
-
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
-
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.