Proxis HF Melt Blown Cartridges
Proxis HF are designed to perform depth filtration whilst handling a high flow-rate.
They feature a two zone filtration structure where a pre-filter and final filter are combined in a single element.
The large internal diameter minimizes differential pressure and consequentially a reduced number of elements compared to using conventionally sized cartridges is required for large flow rate applications. Therefore the required filter housing will be smaller, reducing capital investment. For example, 40” Proxis HF cartridges can handle flow rates of 300 – 800 L/min depending on micron rating and permitted pressure drop.
Proxis HF cartridges are “coreless” filter elements, and mechanical strength is provided by an internal perforated tube located within the filter housing
- 100% polypropylene construction.
- Available micron ratings 1,5,10,20,40 micron.
- Dimensions : 114.3mm I.D. x 152.4mm O.D.
- Length : 20” or 40”.
- Max differential pressure: 4.2 Bar at 20o
- Max temperature: 60oC.
Please contact us for further information or view our range of Filter Cartridges.
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.