Econopleat Pleated Filter Cartridges

Pleated filter cartridges are surface filters for removing hard, non-deformable particles from a liquid stream. They feature a large filter area, a high dirt holding capacity and consequently a long filtration lifetime. The sharp cut-off characteristics created by the filter media ensures dependable and highly efficient particle removal at the designated micron rating. Pleated filter cartridges are therefore widely used as particle size classification filters, as well as being utilised as either final filters or as protection for expensive membrane filter cartridges.

EconoPleat Series

The Econopleat series of pleated cartridges consist of 3 layers of filter media, resulting in a high surface area cartridge that performs well with high flow rates, whilst achieving a good dirt holding capacity with no compromise to operational pressure drops.

Econopleat PP  : 100% polypropylene melt blown filter media with thermally bonded end caps.

Econopleat GF : Borosilicate media with polypropylene support layers with thermally bonded end caps.

Econopleat PE : Polyester media with polypropylene end caps

• Surface area : >0.34m² per 10” length.
• 4 7/8” to 40” lengths.
• Single piece construction.
• Standard ID. 27.5mm OD. 69mm.
• Large outer diameter 116mm versions available, 10” – 40”.
• Available micron ratings (@ 95% efficiency): Econopleat PP: 2 – 50 micron. Econopleat GF: 2,5 10,20. Econopleat PE: 5,10,20,50
• Polypropylene core and polypropylene end caps (for all media).
• End fittings : Double open ended with flat gaskets, Code 3, Code 7, Code 8.
• Gasket materials : Nitrile, EPDM, Viton, Silicone, PTFE encapsulated Viton, PTFE encapsulated Silicone.
• Maximum recommended operating temperature 80^o
• 2.75 Bar max dP.

Please contact us for further information or view our range of Filter Cartridges.