Carbon Wrap Filter Cartridges
The Carbon Wrap (CW) series features powder activated carbon (PAC) impregnated into a cellulose fibre media, removing sediments and other fine particulates throughout its depth. The CW series combines the advantages of both a high dirt-loading depth cartridge with the odour, discolouration and chlorine reduction capabilities of PAC.
The carbon impregnated sheet is wrapped around a polypropylene support core, supported by an outer layer of polyethylene netting.
- 9 ¾” – 40” lengths. Standard I.D. 28 mm, O.D. 64mm.
- Available in large diameter 116mm 9¾” and 20″ lengths for reduced cartridge changeout frequency.
- Rating: 5 micron.
- End caps : Double open ended with EPDM gaskets, Code 3,Code 7 or Code 8.
- Maximum operating temperature 80o
- 5 Bar maximum dP.
Please contact us for further information or view our range of Filter Cartridges.
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.