ECB and SCB Carbon Filter Cartridges
The ECB series uses the latest carbon manufacturing techniques making it the economic choice for a wide range of industrial water applications. The ECB is ideally suited to processes where the life of the carbon is never fully utilised. ECB series cartridges are manufactured from acid washed industrial grade bituminous granular activated carbon (GAC) extruded into a carbon block format.
The SCB series is manufactured using fine, acid washed, bituminous powder activated carbon (PAC), greatly increasing surface area and cartridge life. Food grade additives are used to bond the PAC, enabling the SCB series to be suitable for drinking water applications. Extruded from high quality carbon fines, the SCB has a much higher adsorption capacity, extending life and improving chlorine reduction capacities compared to the ECB series. The result is a highly efficient carbon cartridge with sediment filtration capabilities.
- Constructed with an outer polypropylene wrap that protects and extends the life of the carbon block, capturing particles and preventing premature blinding.
- 9 ¾” and 40” lengths. Standard I,D. 28 mm, O.D. 64mm.
- Available in large diameter 116mm, 9¾” and 20″ lengths for reduced cartridge changeout frequency.
- ECB series : 1, 5 and 10 micron. SCB series : 5,10 micron.
- Double open ended.
- Maximum operating temperature 82o
- 5 Bar maximum dP.
Please contact us for further information or view our range of Filter Cartridges.
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.